CD74AC174E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Clock Frequency | 95MHz |
| Family | AC |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 18.9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Height Seated (Max) | 5.33mm |
| RoHS Status | Non-RoHS Compliant |
CD74AC174E Overview
The package is in the form of 16-DIP (0.300, 7.62mm). A package named Tubeincludes it. In the configuration, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Through Hole. Powered by a 1.5V~5.5Vvolt supply, it operates as follows. Temperature is set to -55°C~125°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74ACseries contain this type of chip. A frequency of 95MHzshould be the maximum output frequency. A total of 1 elements are present. Despite external influences, it consumes 8μAof quiescent current. 16terminations have occurred. A voltage of 5V provides power to the D latch. There is 10pF input capacitance for this T flip flop. Electronic devices of this type belong to the ACfamily. It reaches the maximum supply voltage (Vsup) at 5.5V.
CD74AC174E Features
Tube package
74AC series
CD74AC174E Applications
There are a lot of Rochester Electronics, LLC CD74AC174E Flip Flops applications.
- Balanced Propagation Delays
- Test & Measurement
- Convert a momentary switch to a toggle switch
- Frequency Dividers
- ESD protection
- Asynchronous counter
- Load Control
- High Performance Logic for test systems
- Safety Clamp
- Latch
