CD74AC174M
| Parameters | |
|---|---|
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 6 |
| Clock Frequency | 95MHz |
| Propagation Delay | 181 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.4 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 13.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
CD74AC174M Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. D flip flop is embedded in the Tube package. As configured, the output uses Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.5V~5.5V volts. Currently, the operating temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74AC series. You should not exceed 95MHzin its output frequency. In total, there are 1 elements. Terminations are 16. The 74AC174 family contains this object. Power is provided by a 3.3V supply. Its input capacitance is 10pFfarads. It is a member of the ACfamily of D flip flop. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 16. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. 6bits are used in its design. The maximal supply voltage (Vsup) reaches 5.5V. In order to achieve its superior flexibility, 7 circuits are used. In order for the device to operate, it requires 3.3/5V power supplies. Its output current of 24mAallows for maximum design flexibility. The JK flip flop is with 6 output lines to operate. In terms of quiescent current, it consumes 8μA .
CD74AC174M Features
Tube package
74AC series
16 pins
6 Bits
3.3/5V power supplies
CD74AC174M Applications
There are a lot of Texas Instruments CD74AC174M Flip Flops applications.
- Latch
- 2 – Bit synchronous counter
- Matched Rise and Fall
- Computers
- Asynchronous counter
- Balanced Propagation Delays
- Memory
- Patented noise
- Communications
- Single Up Count-Control Line
