CD74AC175M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 4 |
| Clock Frequency | 100MHz |
| Propagation Delay | 153 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.1 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 12.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC175M Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). Package Tubeembeds it. It is configured with Differentialas an output. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 1.5V~5.5V. -55°C~125°C TAis the operating temperature. D-Typeis the type of this D latch. This type of FPGA is a part of the 74AC series. It should not exceed 100MHzin its output frequency. There are 1 elements in it. There have been 16 terminations. This D latch belongs to the family of 74AC175. The D flip flop is powered by a voltage of 3.3V . This T flip flop has a capacitance of 10pF farads at the input. It is a member of the ACfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. There are 16pins on it. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. An electronic part with 4bits has been designed. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. A power supply of 3.3/5Vis required to operate it. As a result of its output current of 24mA, it is very flexible in terms of design. 8μAquiescent current consumed. 4 channels are available.
CD74AC175M Features
Tube package
74AC series
16 pins
4 Bits
3.3/5V power supplies
CD74AC175M Applications
There are a lot of Texas Instruments CD74AC175M Flip Flops applications.
- Synchronous counter
- Functionally equivalent to the MC10/100EL29
- Data Synchronizers
- Dynamic threshold performance
- Safety Clamp
- Patented noise
- Data transfer
- Memory
- Registers
- ESD protection
