CD74AC175ME4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 4 |
| Clock Frequency | 100MHz |
| Propagation Delay | 153 ns |
| Turn On Delay Time | 3.1 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 12.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC175ME4 Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. A package named Tubeincludes it. There is a Differentialoutput configured with it. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.5V~5.5V volts. -55°C~125°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74AC series. This D flip flop should not have a frequency greater than 100MHz. In total, it contains 1 elements. There is a consumption of 8μAof quiescent energy. There are 16 terminations,It is a member of the 74AC175 family. An input voltage of 3.3Vpowers the D latch. The input capacitance of this JK flip flopis 10pF farads. An electronic device belonging to the family ACcan be found here. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 16. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 4 Bits. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Its flexibility is enhanced by 4 circuits. In order for the device to operate, it requires 3.3/5V power supplies. The 24mA output current allows it to be designed with the greatest amount of flexibility.
CD74AC175ME4 Features
Tube package
74AC series
16 pins
4 Bits
3.3/5V power supplies
CD74AC175ME4 Applications
There are a lot of Texas Instruments CD74AC175ME4 Flip Flops applications.
- Frequency division
- Circuit Design
- Shift Registers
- Dynamic threshold performance
- Buffered Clock
- Parallel data storage
- Single Up Count-Control Line
- Digital electronics systems
- EMI reduction circuitry
- Safety Clamp
