CD74AC251M96
| Parameters | |
|---|---|
| Bandwidth | 100MHz |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 20.9 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC251 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 14.9 ns |
| Family | AC |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 75mA 75mA |
| Supply Type | Single |
CD74AC251M96 Overview
Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) represents its packaging.Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC Multiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 1.5V~5.5V.provides digital controlled switch's digital controlled switch'sSeveral applications are possible for 74AC series multiplexers.It is designed with 16 terminations as part of its basic configuration.There is a base part number of 74AC251 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 3.3V voltage is supplied.Signal switch has 16 component pins.GULL WING represents the end of conductors.Single is used as its supply type.A total of 16 pins are configured on this board.The mounting point is Surface Mount.The logic switch is a member of the AC family.In the signal multiplexer, there are 8 bits available.Avoid unnecessary failures by keeping Vsup at 5.5V.For mux switch's normal operation, there is a power supply provided at 3.3/5V.There are 1 outputs designed to operate the turn signal switch.The multiplexer is equipped with 8 inputs.The switches is packaged according to the way of TR.
CD74AC251M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3/5V
CD74AC251M96 Applications
There are a lot of Texas Instruments CD74AC251M96 Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Make full adder
- Electronic circuits
- Audio transmission
- Video transmission
- Data bus control
- HDMI applications
- Paper plants
- Data communication
- Transmission from the computer system of a satellite
