banner_page

CD74AC253M

16 Terminations1.5V~5.5V 16 Pin 74AC253 Signal switch74AC Series 1 Outputs2 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74AC253M
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 361
  • Description: 16 Terminations1.5V~5.5V 16 Pin 74AC253 Signal switch74AC Series 1 Outputs2 Functions(Kg)

Details

Tags

Parameters
Number of Pins 16
Weight 141.690917mg
Operating Temperature -55°C~125°C
Packaging Tube
Series 74AC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Multiplexer
Technology CMOS
Voltage - Supply 1.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Base Part Number 74AC253
Pin Count 16
Number of Outputs 1
Circuit 2 x 4:1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3/5V
Number of Channels 2
Load Capacitance 50pF
Power Dissipation 1.15W
Number of Bits 4
Throw Configuration 4PST
Propagation Delay 13.3 ns
Family AC
Number of Inputs 8
Output Characteristics 3-STATE
Current - Output High, Low 75mA 75mA
Supply Type Single
Bandwidth 100MHz
Voltage Supply Source Single Supply
Independent Circuits 1
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)

CD74AC253M Overview


Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tube is the packaging method.The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses IC Multiplexer as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.When digital controlled switch operates at 1.5V~5.5V, designers are provided with a greater degree of flexibility.In addition to being a member of the 74AC series, these multiplexers have a wide range of applications.It is designed with 16 terminations as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74AC253.For multiplexer's system, 3.3V voltage is supplied.In this turn signal switch, there are 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is used as its supply type.A total of 16 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the AC family.In the signal multiplexer, there are 4 bits available.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.Normally, 3.3/5V is powered by a battery.As part of the operation of this turn signal switch, there are 1 outputs.The multiplexer is equipped with 8 inputs.The turn signal switch's circuit consists of 2 transmission channels.

CD74AC253M Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3/5V

CD74AC253M Applications


There are a lot of Texas Instruments CD74AC253M Signal Switches / Multiplexers / Decoders applications.

  • Automatic health monitoring systems
  • Speed control of medern motors
  • Arithmetic Logic Units
  • Seven segment displays
  • Memory chips
  • Enabling different rows of memory depending on address in memory chips
  • Analog, digital or video signal switching
  • Microprocessor input/output systems
  • Encrypted communications system
  • Home automation system

Write a review

Note: HTML is not translated!
    Bad           Good