banner_page

CD74AC253M96

16 Terminations1.5V~5.5V 16 Pin 74AC253 Signal switch74AC Series 1 Outputs2 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74AC253M96
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 676
  • Description: 16 Terminations1.5V~5.5V 16 Pin 74AC253 Signal switch74AC Series 1 Outputs2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Series 74AC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Multiplexer
Packing Method TR
Technology CMOS
Voltage - Supply 1.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Base Part Number 74AC253
Pin Count 16
Number of Outputs 1
Circuit 2 x 4:1
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3/5V
Number of Channels 2
Load Capacitance 50pF
Number of Bits 4
Propagation Delay 13.3 ns
Family AC
Number of Inputs 8
Output Characteristics 3-STATE
Current - Output High, Low 75mA 75mA
Supply Type Single
Bandwidth 100MHz
Output Polarity TRUE
Voltage Supply Source Single Supply
Independent Circuits 1
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74AC253M96 Overview


In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.When the operating temperature is kept at -55°C~125°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 1.5V~5.5V, designers are provided with a greater degree of flexibility.Several applications are possible for 74AC series multiplexers.Among its basic configurations are 16 terminations.To find signal switch's related components, a base part number of 74AC253 may also be used.The multiplexer's system is supplied with a voltage of 3.3V.This turn signal switch consists of 16 component pins.Conductors terminate at GULL WING in this design.Single is employed as its supply type.It is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the family of AC.Signal multiplexer contains 4 bits.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 3.3/5V.The turn signal switch operates with 1 outputs.There are 8 inputs provided in this multiplexer.The switches packaging is based on TR.Transmission is carried out over 2 channels in the turn signal switch's circuit.

CD74AC253M96 Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3/5V

CD74AC253M96 Applications


There are a lot of Texas Instruments CD74AC253M96 Signal Switches / Multiplexers / Decoders applications.

  • Electronics industry
  • Enabling block of memory depending on address in memory chips
  • High-performance memory-decoding applications
  • Analog, digital or video signal switching
  • Medium scale TV wall
  • Image transmission
  • Automation system
  • To select different devices in microprocessor input
  • Memory chips
  • Night vision cameras

Write a review

Note: HTML is not translated!
    Bad           Good