CD74AC257M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 8.5 ns |
| Family | AC |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC257M96 Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.digital switch ic uses the method of Surface Mount for mounting.As the analog part, the circuit uses an analog IC Multiplexer.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility when digital controlled switch operates at a 1.5V~5.5V supply voltage.With the 74AC series, the multiplexers are suitable for a diverse range of applications.There are 16 terminations included in its basic configuration.Its logic switch base part number is 74AC257 which can also be used to find its logic switch related parts.For multiplexer's system, 3.3V voltage is supplied.A component pin count of 16 can be found on this turn signal switch.A conductor terminates at GULL WING.Single is used as its supply type.Currently, it is configured with 16 pins.The mount is in Surface Mount.The logic switch is a member of the family of AC.As a result, signal multiplexer provides 2 bits.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.For mux switch's normal operation, power supply 3.3/5V is provided.As a result, the turn signal switch consists of 1 outputs.The multiplexer is equipped with 8 inputs.The switches packaging is based on TR.The turn signal switch's circuit consists of 4 transmission channels.
CD74AC257M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3/5V
CD74AC257M96 Applications
There are a lot of Texas Instruments CD74AC257M96 Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Steel plants
- RF-based home automation system
- Small scale TV wall
- Used to connect a single source to multiple destinations
- Make full adder
- A robotic vehicle with the metal detector
- Data bus control
- Recording transmission
- To select different devices in microprocessor input
