CD74AC273E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74AC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 114MHz |
| Propagation Delay | 169 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.4 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 12.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC273E Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). The package Tubecontains it. As configured, the output uses Non-Inverted. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Through Hole. Powered by a 1.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -55°C~125°C TA. D-Typeis the type of this D latch. In this case, it is a type of FPGA belonging to the 74AC series. You should not exceed 114MHzin the output frequency of the device. The element count is 1 . A total of 20 terminations have been made. JK flip flop belongs to 74AC273 family. A voltage of 3.3V is used as the power supply for this D latch. Its input capacitance is 10pF farads. It belongs to the family of electronic devices known as AC. There is an electronic part mounted in the way of Through Hole. The electronic flip flop is designed with pins 20. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Flip flops designed with 8bits are used in this part. As soon as 5.5Vis reached, Vsup reaches its maximum value. Its flexibility is enhanced by 8 circuits. A power supply of 3.3/5Vis required to operate it. With an output current of 24mA, it is possible to design the device in any way you want. 8μAquiescent current consumed.
CD74AC273E Features
Tube package
74AC series
20 pins
8 Bits
3.3/5V power supplies
CD74AC273E Applications
There are a lot of Texas Instruments CD74AC273E Flip Flops applications.
- Communications
- Instrumentation
- Digital electronics systems
- 2 – Bit synchronous counter
- Common Clocks
- Latch-up performance
- Automotive
- Memory
- Memory
- QML qualified product
