CD74AC273EG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 1.5V~5.5V |
| Base Part Number | 74AC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 100MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 13.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
CD74AC273EG4 Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. The Tubepackage contains it. In the configuration, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. Powered by a 1.5V~5.5Vvolt supply, it operates as follows. A temperature of -55°C~125°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74AC series. This D flip flop should not have a frequency greater than 100MHz. D latch consists of 1 elements. As a result, it consumes 8μA of quiescent current without being affected by external factors. This D latch belongs to the family of 74AC273. A JK flip flop with a 10pFfarad input capacitance is used here.
CD74AC273EG4 Features
Tube package
74AC series
CD74AC273EG4 Applications
There are a lot of Texas Instruments CD74AC273EG4 Flip Flops applications.
- Communications
- Buffered Clock
- Guaranteed simultaneous switching noise level
- Bounce elimination switch
- Balanced 24 mA output drivers
- Divide a clock signal by 2 or 4
- EMI reduction circuitry
- Test & Measurement
- Memory
- Asynchronous counter
