CD74AC374E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74AC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 125MHz |
| Propagation Delay | 135 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2.7 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC374E Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. Package Tubeembeds it. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Through Holeis in the way of this electric part. The JK flip flop operates with an input voltage of 1.5V~5.5V volts. The operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74ACseries of FPGAs. In order for it to function properly, its output frequency should not exceed 125MHz. A total of 1elements are contained within it. 20terminations have occurred. It is a member of the 74AC374 family. A voltage of 3.3V is used to power it. JK flip flop input capacitance is 10pF farads. The electronic device belongs to the ACfamily. A part of the electronic system is mounted in the way of Through Hole. This board is designed with 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. The flip flop is designed with 8bits. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. The superior flexibility of this product is achieved by using 8 circuits. The flip flop has 2ports embedded within it. With an output current of 24mA, it is possible to design the device in any way you want. It operates with 3 output lines. There is a consumption of 8μAof quiescent current from it.
CD74AC374E Features
Tube package
74AC series
20 pins
8 Bits
CD74AC374E Applications
There are a lot of Texas Instruments CD74AC374E Flip Flops applications.
- High Performance Logic for test systems
- Bus hold
- Synchronous counter
- Test & Measurement
- Power down protection
- Count Modes
- Functionally equivalent to the MC10/100EL29
- Event Detectors
- Bounce elimination switch
- Divide a clock signal by 2 or 4
