CD74AC374M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Ports | 2 |
| Clock Frequency | 125MHz |
| Family | AC |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | Non-RoHS Compliant |
CD74AC374M Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. The Tubepackage contains it. This output is configured with Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. A voltage of 1.5V~5.5Vis used as the supply voltage. In this case, the operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. It should not exceed 125MHzin terms of its output frequency. In total, it contains 1 elements. As a result, it consumes 8μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. The D flip flop is powered by a voltage of 5V . Its input capacitance is 10pF farads. An electronic device belonging to the family ACcan be found here. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). A D flip flop with 2embedded ports is available.
CD74AC374M Features
Tube package
74AC series
CD74AC374M Applications
There are a lot of Rochester Electronics, LLC CD74AC374M Flip Flops applications.
- Storage Registers
- Latch
- Patented noise
- Single Down Count-Control Line
- Single Up Count-Control Line
- Balanced Propagation Delays
- EMI reduction circuitry
- Balanced 24 mA output drivers
- Registers
- Convert a momentary switch to a toggle switch
