Parameters |
Width |
6.35mm |
Thickness |
4.57mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Weight |
1.1991g |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
74AC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Subcategory |
Bus Driver/Transceiver |
Technology |
CMOS |
Voltage - Supply |
1.5V~5.5V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
2.54mm |
Base Part Number |
74AC573 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Max Supply Current |
8μA |
Number of Bits |
8 |
Propagation Delay |
8.5 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
3 ns |
Family |
AC |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE HIGH |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
5.08mm |
Length |
24.33mm |
CD74AC573E Overview
Package 20-DIP (0.300, 7.62mm) includes it. The package is in the form of Tube. Tri-State is used for the output it is configured with. D-Type Transparent Latch is the logic type of this electrical device. A Through Hole mount is used for mounting this electronic part. In order for it to operate, it needs a supply voltage of 1.5V~5.5V. There is a temperature of -55°C~125°C at which the system operates. This FPGA is part of the 74AC series. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This type belongs to the 74AC573 family. The supply voltage of the device is 3.3V. There are 20 pins on it. AC is the family name of this electronic device. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Through Hole method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the Bus Driver/Transceiver subcategory. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. Due to its 24mA output current, it offers maximum design flexibility. A binary equivalent of the input line is generated by the 3 output lines. It consumes 8μA of quiescent current without being affected by outside factors. The circuit's superior flexibility is achieved through the use of 8 circuits.
CD74AC573E Features
20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins
CD74AC573E Applications
There are a lot of Texas Instruments CD74AC573E Latches applications.
- Up-Down Johnson
- Flip-flops
- Automotive HEV/EV Powertrain
- Shift left register
- Address register
- Serial Output Register
- Counting
- Avionics
- Four-bit storage with output enable
- Parallel Output