Parameters |
Contact Plating |
Gold |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
20 |
Weight |
500.709277mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Subcategory |
FF/Latches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Pin Count |
20 |
Polarity |
Non-Inverting |
Power Supplies |
3.3/5V |
Temperature Grade |
MILITARY |
Number of Circuits |
8 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Current - Output |
24mA |
Number of Bits |
8 |
Propagation Delay |
150 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
3 ns |
Family |
AC |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
-24mA |
Low Level Output Current |
24mA |
Independent Circuits |
1 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
CD74AC573M96E4 Overview
SOIC contains it. As a result, it has a packaging of Tape and Reel. 8 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. In order to operate it, the supply voltage must be 3.3V. It is equipped with 20 pin count. This electronic device is categorized as a AC electronic device. There are 20 pins on it. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. The system is powered by 3.3/5V sources. Aquiescent current is consumed by 8μA without being affected by external forces. The superior flexibility of the system is achieved through its use of 8 circuits. There is 24mA output current at the low level. -24mA is the high level output current. There should be a temperature below 125°C at which the system is operating. Temperatures above -55°C should be used. 5.5V is the maximum voltage it supports. With a minimum supply voltage of 1.5V, it operates. A BUS DRIVER logic IC is used. It features maximum flexibility in design due to 24mA output current.
CD74AC573M96E4 Features
SOIC package
8 Bits
20 pin count
20 pins
3.3/5V power supplies
CD74AC573M96E4 Applications
There are a lot of Texas Instruments CD74AC573M96E4 Latches applications.
- High-speed logic
- Four-bit storage with output enable
- Automotive Infotainment
- Counters
- Parallel data storage
- Digital bus buffer
- Automotive Body Electronics
- Pseudo-random code generators
- Network Switches
- Automotive Cluster