CD74AC574M
| Parameters | |
|---|---|
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 125MHz |
| Propagation Delay | 135 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2.7 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
CD74AC574M Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. It is contained within the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 1.5V~5.5Vvolts. A temperature of -55°C~125°C TAis used in the operation. The type of this D latch is D-Type. JK flip flop belongs to the 74ACseries of FPGAs. Its output frequency should not exceed 125MHz Hz. A total of 1elements are present in it. There are 20 terminations,The object belongs to the 74AC574 family. Power is provided by a 3.3V supply. The input capacitance of this JK flip flopis 10pF farads. A device of this type belongs to the family of AC. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 20. This device exhibits a clock edge trigger type of Positive Edge. It is included in Bus Driver/Transceiver. It is designed with a number of bits of 8. The maximal supply voltage (Vsup) reaches 5.5V. The D flip flop is embedded with 2ports. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. The JK flip flop is with 3 output lines to operate. It consumes 8μA of quiescent current without being affected by external factors. A total of 8 channels are available.
CD74AC574M Features
Tube package
74AC series
20 pins
8 Bits
CD74AC574M Applications
There are a lot of Texas Instruments CD74AC574M Flip Flops applications.
- Parallel data storage
- Frequency Dividers
- Individual Asynchronous Resets
- Frequency division
- Bounce elimination switch
- 2 – Bit synchronous counter
- Circuit Design
- High Performance Logic for test systems
- Set-reset capability
- Convert a momentary switch to a toggle switch
