CD74AC74E
| Parameters | |
|---|---|
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Height Seated (Max) | 5.33mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Clock Frequency | 110MHz |
| Family | AC |
| Current - Quiescent (Iq) | 4μA |
CD74AC74E Overview
In the form of 14-DIP (0.300, 7.62mm), it has been packaged. There is an embedded version in the package Tube. It is configured with Differentialas an output. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Through Hole. The JK flip flop operates at 1.5V~5.5Vvolts. Temperature is set to -55°C~125°C TA. It is an electronic flip flop with the type D-Type. The 74ACseries comprises this type of FPGA. Its output frequency should not exceed 110MHz. The list contains 2 elements. During its operation, it consumes 4μA quiescent energy. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Power is provided by a 5V supply. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Electronic devices of this type belong to the ACfamily. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied.
CD74AC74E Features
Tube package
74AC series
CD74AC74E Applications
There are a lot of Rochester Electronics, LLC CD74AC74E Flip Flops applications.
- Single Down Count-Control Line
- Digital electronics systems
- Data transfer
- Matched Rise and Fall
- Communications
- Reduced system switching noise
- Circuit Design
- Buffer registers
- Memory
- Frequency Divider circuits
