CD74AC74E
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 110MHz |
| Propagation Delay | 125 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 90000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
CD74AC74E Overview
The package is in the form of 14-DIP (0.300, 7.62mm). A package named Tubeincludes it. T flip flop uses Differentialas the output. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Through Hole. A voltage of 1.5V~5.5Vis required for its operation. It is operating at -55°C~125°C TA. The type of this D latch is D-Type. It belongs to the 74ACseries of FPGAs. In order for it to function properly, its output frequency should not exceed 110MHz. A total of 14 terminations have been made. It is a member of the 74AC74 family. The power source is powered by 3.3V. JK flip flop input capacitance is 10pF farads. Electronic devices of this type belong to the ACfamily. This electronic part is mounted in the way of Through Hole. As you can see from the design, it has pins with 14. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. 5.5Vis the maximum supply voltage (Vsup). It runs on 3.3/5Vvolts of power. Its output current of 24mAallows for maximum design flexibility. It is designed with 1 output lines. It consumes 4μA current. A total of 2 channels are available.
CD74AC74E Features
Tube package
74AC series
14 pins
3.3/5V power supplies
CD74AC74E Applications
There are a lot of Texas Instruments CD74AC74E Flip Flops applications.
- ESD protection
- Data transfer
- Functionally equivalent to the MC10/100EL29
- Cold spare funcion
- Parallel data storage
- Counters
- Frequency Dividers
- Set-reset capability
- Data storage
- Matched Rise and Fall
