CD74AC74M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 125 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 90000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC74M96 Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. The package Cut Tape (CT)contains it. This output is configured with Differential. There is a trigger configured with Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 1.5V~5.5V. The operating temperature is -55°C~125°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74ACseries of FPGAs. In order for it to function properly, its output frequency should not exceed 100MHz. A total of 14terminations have been recorded. The 74AC74family includes it. A voltage of 3.3V is used to power it. The input capacitance of this JK flip flopis 10pF farads. Devices in the ACfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latches. There is a 5.5Vmaximum supply voltage (Vsup). Its flexibility is enhanced by 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The power supply is 3.3/5V. This T flip flop features a maximum design flexibility due to its output current of 24mA. In order for the chip to function, it has 1output lines. In terms of quiescent current, it consumes 4μA .
CD74AC74M96 Features
Cut Tape (CT) package
74AC series
14 pins
3.3/5V power supplies
CD74AC74M96 Applications
There are a lot of Texas Instruments CD74AC74M96 Flip Flops applications.
- Data storage
- Safety Clamp
- Digital electronics systems
- CMOS Process
- Storage registers
- Computers
- Bus hold
- Balanced Propagation Delays
- Differential Individual
- Pattern generators
