CD74AC74ME4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latch |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Frequency | 110MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
| Load Capacitance | 50pF |
| Current - Output | 24mA |
| Number of Bits | 1 |
| Propagation Delay | 125 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74AC74ME4 Overview
The flip flop is packaged in SOIC. In total, it contains 2 elements. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 3.3V provides power to the D latch. In this case, the D flip flop belongs to the ACfamily. The electronic part is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latch base part number. The design is based on 1bits. This D flip flop is well suited for TUBE based on its reliable performance. It runs on 3.3/5Vvolts of power. The number of input lines is 1. In terms of quiescent current, it consumes 4μA . The high level output current is set to -24mA. A 24mAvalue is set for low-level output current. It is recommended that the operating temperature be lower than 125°C. The operating temperature should be higher than -55°C. Despite its minimal supply voltage of 1.5V, it is capable of operating. In this case, it supports a maximum supply voltage of 5.5V. It is possible to achieve 110MHz frequencies. D FLIP-FLOPis used as the logic IC in this D flip flop. It has 2 functions. It is equipped with 14 pin count. With an output current of 24mA, this flip flop offers maximum design flexibility.
CD74AC74ME4 Features
14 pins
1 Bits
3.3/5V power supplies
2 Functions
14 pin count
CD74AC74ME4 Applications
There are a lot of Texas Instruments CD74AC74ME4 Flip Flops applications.
- Bus hold
- Control circuits
- Matched Rise and Fall
- Storage Registers
- Counters
- Pattern generators
- Asynchronous counter
- QML qualified product
- Dynamic threshold performance
- Safety Clamp
