CD74ACT109E
| Parameters | |
|---|---|
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 10.3 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.6 ns |
| Family | ACT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | JK Type |
| Subcategory | FF/Latch |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74ACT109 |
CD74ACT109E Overview
It is embeded in 16-DIP (0.300, 7.62mm) case. D flip flop is included in the Tubepackage. T flip flop uses Differentialas the output. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -55°C~125°C TAis considered to be the operating temperature. This D latch has the type JK Type. In terms of FPGAs, it belongs to the 74ACT series. It should not exceed 100MHzin its output frequency. A total of 16terminations have been recorded. The 74ACT109family includes it. It is powered by a voltage of 5V . This T flip flop has a capacitance of 10pF farads at the input. In this case, the D flip flop belongs to the ACTfamily. A part of the electronic system is mounted in the way of Through Hole. As you can see from the design, it has pins with 16. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latch. The superior flexibility of this circuit is achieved by using 2 circuits. An electrical current of 5V volts is applied to it. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It offers maximum design flexibility with its output current of 24mA. It consumes 4μA of quiescent current without being affected by external factors.
CD74ACT109E Features
Tube package
74ACT series
16 pins
5V power supplies
CD74ACT109E Applications
There are a lot of Texas Instruments CD74ACT109E Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Automotive
- Data transfer
- Matched Rise and Fall
- Cold spare funcion
- Dynamic threshold performance
- Computing
- Bus hold
- Clock pulse
- Common Clocks
