CD74ACT109EG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 100MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
CD74ACT109EG4 Overview
As a result, it is packaged as 16-DIP (0.300, 7.62mm). The Tubepackage contains it. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. Through Holemounts this electrical part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. -55°C~125°C TAis the operating temperature. JK Typedescribes this flip flop. JK flip flop belongs to the 74ACTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 100MHz. A total of 2elements are contained within it. There is 4μA quiescent consumption. This D latch belongs to the family of 74ACT109. Its input capacitance is 10pF farads.
CD74ACT109EG4 Features
Tube package
74ACT series
CD74ACT109EG4 Applications
There are a lot of Texas Instruments CD74ACT109EG4 Flip Flops applications.
- ESCC
- Frequency Dividers
- Computers
- Cold spare funcion
- Load Control
- Clock pulse
- Event Detectors
- Divide a clock signal by 2 or 4
- Storage Registers
- EMI reduction circuitry
