CD74ACT139M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 1.375W |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 10.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 12 ns |
| Family | ACT |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Power Supply Current-Max (ICC) | 0.08mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT139M Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Tube.Surface Mount is the mounting method digital switch ic uses.Decoder/Demultiplexer is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Multiplexers from the 74ACT series can be used in a wide range of applications.The basic configuration of this system includes 16 terminations.Its logic switch base part number is 74ACT139 which can also be used to find its logic switch related parts.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 16 component pins.Conductors terminate at GULL WING in this design.There is a supply type of Single employed as part of this supply.The board is configured with 16 pins.It is positioned in the direction of Surface Mount.The logic switch is a member of the ACT family.Signal multiplexer consists of 4 bits.In order to maintain mux switch's normal operation, power is provided to 5V.There are 4 outputs designed for the operation of the turn signal switch.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.Not being affected by the external factors, consumes 8μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.For the normal operation of the device, 2 circuits must be formed.
CD74ACT139M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
CD74ACT139M Applications
There are a lot of Texas Instruments CD74ACT139M Signal Switches / Multiplexers / Decoders applications.
- High-performance memory-decoding applications
- Data-routing applications
- Logic gates for other digital devices
- Paper plants
- Enabling block of memory depending on address in memory chips
- Memory chips
- Analog, digital or video signal switching
- Analog to digital conversion
- Combinational circuit
- CPU memory location identification
