CD74ACT151M96
| Parameters | |
|---|---|
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 8:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 14.1 ns |
| Family | ACT |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Max Power Dissipation | 200mW |
CD74ACT151M96 Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Cut Tape (CT) method.Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Multiplexer.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.The multiplexers from 74ACT series can be used for a wide range of applications.The basic configuration includes 16 terminations.As its base part number is 74ACT151, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 16 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.This multiplexer ic has 16 pins configured.The mount is in Surface Mount.I would like to refer to the logic switch as a member of the ACT family.There are 8 bits in signal multiplexer.mux switch's normal operation requires the power supply of 5V.In order for the turn signal switch to work, there are 1 outputs.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.TR is used to package the switches.For the purpose of accepting voltage levels, the multiplexers have 2 input lines.As a result of the operation of the digitalswitch, 1 circuits are formed.
CD74ACT151M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
2 input lines
CD74ACT151M96 Applications
There are a lot of Texas Instruments CD74ACT151M96 Signal Switches / Multiplexers / Decoders applications.
- Communication system
- To select different devices in microprocessor output
- To select different devices in microprocessor input
- Microprocessor input/output systems
- High-performance memory-decoding applications
- Data transfer
- LVDS
- Data-routing applications
- Logic circuits
- Enabling block of memory depending on address in memory chips
