CD74ACT153E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 950mW |
| Number of Bits | 2 |
| Throw Configuration | 4PST |
| Propagation Delay | 18 ns |
| Family | ACT |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT153E Overview
Due to the lack of space on the board, digital switch is provided in the 16-DIP (0.300, 7.62mm).As a result, it is packaged in a way that is referred to as Tube.For mounting, digital switch ic uses the method Through Hole.For the analog part of the multiplexers, an IC Multiplexer is used.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74ACT series, these multiplexers have a wide range of applications.It is designed with 16 terminations as part of its basic configuration.The part number for 74ACT153 can be used to find its logic switch related parts as well.The multiplexer's system is supplied with a voltage of 5V.There are 16 component pins in this turn signal switch.There is a type of supply of Single.A total of 16 pins are configured on this board.The multiplexer ic is mounted in the direction of Through Hole.The logic switch belongs to the family of ACT.There are 2 bits in signal multiplexer.Keep Vsup at 4.5V to avoid unnecessary failures.Avoid unnecessary failures by keeping Vsup at 5.5V.In order to maintain mux switch's normal operation, power is provided to 5V.The turn signal switch has 1 outputs designed for operation.This multiplexer has 8 inputs.For the normal operation of the device, 2 circuits must be formed.
CD74ACT153E Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
CD74ACT153E Applications
There are a lot of Texas Instruments CD74ACT153E Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Night vision cameras
- Relay
- Computer memory
- Time division multiplexing system
- Electronic circuits
- Microprocessor instruction decoding
- HDMI applications
- High-performance memory systems
- Image transmission
