CD74ACT153M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 1.15W |
| Number of Bits | 2 |
| Throw Configuration | 4PST |
| Propagation Delay | 18 ns |
| Family | ACT |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT153M Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).Tube represents its packaging.Digital switch ic adheres to a mounting method of Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.These multiplexers are members of the 74ACT series, which provide extensive application potential.The basic configuration of this system includes 16 terminations.The part number for 74ACT153 can be used to find its logic switch related parts as well.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 16 can be found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a supply type of Single employed as part of this supply.There are 16 pins on it.It is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the ACT family.As a result, signal multiplexer provides 2 bits.Vsup should be kept at 4.5V to prevent some unnecessary failures.Keeping Vsup at 5.5V will prevent some unnecessary failures.mux switch's normal operation requires the power supply of 5V.In order for the turn signal switch to work, there are 1 outputs.There are 8 inputs provided in this multiplexer.Normally, the digitalswitch consists of 2 circuits.
CD74ACT153M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
CD74ACT153M Applications
There are a lot of Texas Instruments CD74ACT153M Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- Data distribution
- Combinational circuit
- Logic circuits
- Automatic Monitoring systems
- Encrypted communications system
- Code converters
- Memory chips
- To select different devices in microprocessor input
- Analog, digital or video signal switching
