CD74ACT153NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | 4PST |
| Propagation Delay | 18 ns |
| Family | ACT |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT153NSR Overview
This is a relatively small item of digital switch that is included in the 16-SOIC (0.209, 5.30mm Width) in order to save space on the board.It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Multiplexer as the analog IC.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.The multiplexers can be used for a wide range of applications since they are members of 74ACT series.Among its basic configurations are 16 terminations.The base part number is 74ACT153, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V volts.This turn signal switch has a total of 16 component pins.A conductor terminates at GULL WING.Single is employed as its supply type.A configuration of 16 pins is used.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the ACT family.In this signal multiplexer, there are 2 bits that are provided.Keeping Vsup at 4.5V will prevent some unwanted failures.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.It is provided that 5V has a power supply in order to function normally.As part of the operation of this turn signal switch, there are 1 outputs.It has 8 inputs.TR is used to package the switches.Voltage levels are accepted through 2 input lines of multiplexers.
CD74ACT153NSR Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
2 input lines
CD74ACT153NSR Applications
There are a lot of Texas Instruments CD74ACT153NSR Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- Idle motor
- War field flying robot with a night vision flying camera
- Speed synchronization of multiple motors in industries
- Microprocessor instruction decoding
- Enabling different rows of memory depending on address in memory chips
- Metal detectors
- Control unit of Central Processing unit (CPU)
- Small scale TV wall
- High-performance memory-decoding applications
