CD74ACT157M
| Parameters | |
|---|---|
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 8.6 ns |
| Family | ACT |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Max Power Dissipation | 1.15W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
CD74ACT157M Overview
As a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tube.The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.Multiplexers of the 74ACT series can be used in a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.There is a base part number of 74ACT157 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V volts.Currently, this turn signal switch has a total of 16 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.This multiplexer ic has 16 pins configured.This unit is mounted in the way of Surface Mount.Among the family of ACT the logic switch is a member.Signal multiplexer provides 2 bits.During mux switch's normal operation, 5V is provided with a power supply.For the turn signal switch's operation, there are 1 outputs.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.A multiplexer such as this has 8 inputs available.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
CD74ACT157M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
CD74ACT157M Applications
There are a lot of Texas Instruments CD74ACT157M Signal Switches / Multiplexers / Decoders applications.
- Paper plants
- Video transmission
- Microprocessor memory systems
- Transmission from the computer system of a satellite
- Medium scale TV wall
- Data distribution
- Seven segment displays
- Arithmetic Logic Units
- Data bus control
- Speed synchronization of multiple motors in industries
