CD74ACT158M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT158 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 1.15W |
| Number of Bits | 4 |
| Throw Configuration | DPST |
| Propagation Delay | 9.2 ns |
| Family | ACT |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT158M96 Overview
Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).The package is in the form of Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.The analog IC in the multiplexers is identified as Multiplexer.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74ACT series can be used in a wide range of applications.The basic configuration of this system includes 16 terminations.In addition, it also has a base part number of 74ACT158, which can be used to find related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has 16 component pins.As the end of conductors, it uses GULL WING.In this case, Single is employed as the supply type.With 16 pins, it is configured.The mounting is in the way of Surface Mount.In the ACT family, the logic switch is included.In this signal multiplexer, there are 4 bits that are provided.It is provided that 5V has a power supply in order to function normally.There are 1 outputs designed for the operation of the turn signal switch.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.There are 8 inputs provided in this multiplexer.The signal switching is packaged by TR. To accept voltage levels, the multiplexers have2 input lines.As a result of the operation of the digitalswitch, 4 circuits are formed.
CD74ACT158M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
2 input lines
CD74ACT158M96 Applications
There are a lot of Texas Instruments CD74ACT158M96 Signal Switches / Multiplexers / Decoders applications.
- Used to connect a single source to multiple destinations
- Image transmission
- Small scale TV wall
- Combinational circuit
- RF-based home automation system
- To select different devices in microprocessor input
- To select different task for memory in microprocessor memory systems
- Microprocessor instruction decoding
- Robotic vehicles
- Signal router
