CD74ACT174E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 80MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Height Seated (Max) | 5.33mm |
| RoHS Status | Non-RoHS Compliant |
CD74ACT174E Overview
The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. In the configuration, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. Through Holeis occupied by this electronic component. With a supply voltage of 4.5V~5.5V volts, it operates. In this case, the operating temperature is -55°C~125°C TA. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74ACT series. This D flip flop should not have a frequency greater than 80MHz. The list contains 1 elements. There is 8μA quiescent consumption. The number of terminations is 16. Power is provided by a 5V supply. Its input capacitance is 10pFfarads. Electronic devices of this type belong to the ACTfamily. As soon as 5.5Vis reached, Vsup reaches its maximum value. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V.
CD74ACT174E Features
Tube package
74ACT series
CD74ACT174E Applications
There are a lot of Rochester Electronics, LLC CD74ACT174E Flip Flops applications.
- Shift Registers
- Single Down Count-Control Line
- Differential Individual
- Latch
- Dynamic threshold performance
- Common Clocks
- Shift registers
- Bus hold
- Bounce elimination switch
- Parallel data storage
