CD74ACT174M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 6 |
| Clock Frequency | 80MHz |
| Propagation Delay | 15.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 6 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 80000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT174M96 Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. Package Cut Tape (CT)embeds it. As configured, the output uses Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at -55°C~125°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74ACT series. This D flip flop should not have a frequency greater than 80MHz. In total, it contains 1 elements. A total of 16terminations have been recorded. The 74ACT174family includes it. It is powered by a voltage of 5V . The input capacitance of this JK flip flopis 10pF farads. In terms of electronic devices, this device belongs to the ACTfamily of devices. There is an electronic part mounted in the way of Surface Mount. This board is designed with 16pins on it. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. An electronic part with 6bits has been designed. The superior flexibility is achieved through the use of 7 circuits. Considering its reliability, this T flip flop is well suited for TR. An electrical current of 5V volts is applied to it. For high efficiency, the supply voltage should be set to 5V. Its output current of 24mAallows for maximum design flexibility. It has 6 output lines to operate. In terms of quiescent current, it consumes 8μA .
CD74ACT174M96 Features
Cut Tape (CT) package
74ACT series
16 pins
6 Bits
5V power supplies
CD74ACT174M96 Applications
There are a lot of Texas Instruments CD74ACT174M96 Flip Flops applications.
- Storage Registers
- Registers
- Cold spare funcion
- QML qualified product
- Circuit Design
- Individual Asynchronous Resets
- Balanced 24 mA output drivers
- Synchronous counter
- Load Control
- Dynamic threshold performance
