CD74ACT174M96G4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 80MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Current - Output | 24mA |
| Propagation Delay | 14 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.5 ns |
| Family | ACT |
| Logic Function | D-Type |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 6 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74ACT174M96G4 Overview
The flip flop is packaged in SOIC. There are 1 elements in it. The number of terminations is 16. Power is provided by a 5V supply. In terms of electronic devices, this device belongs to the ACTfamily of devices. There is an electronic part mounted in the way of Surface Mount. 16pins are included in its design. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. A reliable performance of this D flip flop makes it well suited for use in TR. It operates from 5V power supplies. High efficiency requires the supply voltage to be maintained at 5V. This D latch consumes 8μA quiescent current at all. -24mAis the output current at high level. In the low level output current setting, 24mAis used. A temperature below 125°Cis recommended for operation. If the operating temperature is higher than -55°C, the system should operate properly. The minimal supply voltage is 4.5V. 5.5Vis the maximum supply voltage it supports. It is possible to achieve a frequency of 80MHz. It uses the logic IC D FLIP-FLOP. As a result, it is equipped with 1 functions . The JK flip flop has a pin count of 16. It features maximum design flexibility due to the 24mA output current.
CD74ACT174M96G4 Features
16 pins
5V power supplies
1 Functions
16 pin count
CD74ACT174M96G4 Applications
There are a lot of Texas Instruments CD74ACT174M96G4 Flip Flops applications.
- Test & Measurement
- ATE
- Computers
- Cold spare funcion
- Asynchronous counter
- Memory
- Digital electronics systems
- Consumer
- Dynamic threshold performance
- Matched Rise and Fall
