CD74ACT175M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 4 |
| Clock Frequency | 114MHz |
| Propagation Delay | 13 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2.9 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 11.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT175M96 Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). A package named Tape & Reel (TR)includes it. In the configuration, Differentialis used as the output. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is operating at a temperature of -55°C~125°C TA. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74ACT series. It should not exceed 114MHzin terms of its output frequency. The list contains 1 elements. Currently, there are 16 terminations. D latch belongs to the 74ACT175 family. A voltage of 5V provides power to the D latch. Its input capacitance is 10pF farads. Devices in the ACTfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. This board has 16 pins. In this device, the clock edge trigger type is Positive Edge. This part is included in FF/Latches. The flip flop is designed with 4bits. Despite its superior flexibility, it relies on 4 circuits to achieve it. Considering the reliability of this T flip flop, it is well suited for TR. It runs on 5Vvolts of power. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. As a result of its output current of 24mA, it is very flexible in terms of design. It consumes a total of 8μA quiescent current at any given time.
CD74ACT175M96 Features
Tape & Reel (TR) package
74ACT series
16 pins
4 Bits
5V power supplies
CD74ACT175M96 Applications
There are a lot of Texas Instruments CD74ACT175M96 Flip Flops applications.
- Buffered Clock
- Computers
- Common Clocks
- ATE
- Shift registers
- Frequency division
- Set-reset capability
- Divide a clock signal by 2 or 4
- Latch
- Computing
