CD74ACT238E
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ACT238 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Output Current | 24mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 3:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Power Dissipation | 110mW |
| Number of Bits | 8 |
| Propagation Delay | 14.2 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14.2 ns |
| Family | ACT |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Max I(ol) | 0.024 A |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
CD74ACT238E Overview
Digital switch is provided in the 16-DIP (0.300, 7.62mm) for the purpose of saving board space.Tube is the packaging method.Digital switch ic adheres to a mounting method of Through Hole.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.In addition to being a member of the 74ACT series, these multiplexers have a wide range of applications.The basic configuration includes 16 terminations.There is a base part number of 74ACT238 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V voltage.A component pin count of 16 is found on this turn signal switch.Single is used as its supply type.This multiplexer ic has 16 pins configured.The mounting point is Through Hole.Among the family of ACT the logic switch is a member.As a result, signal multiplexer provides 8 bits.The power supply of 5V is provided for mux switch's normal operation.The turn signal switch operates with 8 outputs.Decoder/Drivers is the classification for this the digital switch ic.No external influence consumes 8μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The multiplexer is equipped with 3 inputs.The mux switch configuration contains 1 elements.
CD74ACT238E Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
CD74ACT238E Applications
There are a lot of Texas Instruments CD74ACT238E Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Memory chips
- Image transmission
- D/A converters
- Speed control of medern motors
- Data demultiplexing
- To select different devices in microprocessor output
- Recording transmission
- Transmission from the computer system of a satellite
- Medical industry
