CD74ACT253E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT253 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 18 ns |
| Family | ACT |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 75mA 75mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT253E Overview
In order to save board space, digital switch is located in the 16-DIP (0.300, 7.62mm).As a result, it is packaged in the way of Tube.Through Hole is the mounting method digital switch ic uses.the multiplexers uses IC Multiplexer as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Since they are members of the 74ACT series, they can be used in a wide variety of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74ACT253, which is also useful when looking up signal switch's related components.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch contains 16 component pins.In this case, the supply type is Single.Currently, it is configured with a 16 pin configuration.As you can see, it is mounted in the direction of Through Hole.The logic switch is a member of the family of ACT.The multiplexer ic provides 4 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.In order to maintain mux switch's normal operation, power is provided to 5V.For the turn signal switch's operation, there are 1 outputs.The multiplexer provides 8 inputs.The turn signal switch's circuit consists of 2 transmission channels.
CD74ACT253E Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
CD74ACT253E Applications
There are a lot of Texas Instruments CD74ACT253E Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Combinational circuit
- LVDS
- Communication system
- Analog to digital conversion
- Enabling block of memory depending on address in memory chips
- Recording transmission
- Solenoid cooling fan
- Speed synchronization of multiple motors in industries
- Robotic vehicles
