CD74ACT257M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 10.7 ns |
| Family | ACT |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 75mA 75mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 9.7 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT257M Overview
This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.As a result, it is packaged in a way that is referred to as Tube.In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses IC Multiplexer as the analog IC.When the operating temperature is kept at -55°C~125°C, turn signal switch will not be susceptible to external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74ACT series can be used in a wide range of applications.It is designed with 16 terminations as part of its basic configuration.In addition, it also has a base part number of 74ACT257, which can be used to find related parts.For multiplexer's system, 5V voltage is supplied.There are 16 component pins in this turn signal switch.It is the end of conductors that is represented by GULL WING.Its supply type is Single, which is used as the source of power.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of ACT.In the signal multiplexer, there are 2 bits available.It is provided that 5V has a power supply in order to function normally.This turn signal switch has 1 outputs designed for its operation.Supply voltages of 5V can provide reliable performance of the multiplexers.The multiplexer is equipped with 8 inputs.A total of 4 transmission channels are available in the turn signal switch's circuit.
CD74ACT257M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
CD74ACT257M Applications
There are a lot of Texas Instruments CD74ACT257M Signal Switches / Multiplexers / Decoders applications.
- Relay
- Metal detectors
- LVDS
- Arithmetic Logic Units
- Paper plants
- Logic circuits
- Recording transmission
- CPU memory location identification
- Video transmission
- Speed control of medern motors
