banner_page

CD74ACT257M96

16 Terminations4.5V~5.5V Signal switch74ACT Series 1 Outputs4 Functions


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-CD74ACT257M96
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 155
  • Description: 16 Terminations4.5V~5.5V Signal switch74ACT Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Series 74ACT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Multiplexer
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 4
Supply Voltage 5V
Reach Compliance Code unknown
Number of Outputs 1
Qualification Status COMMERCIAL
Circuit 4 x 2:1
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Family ACT
Number of Inputs 2
Output Characteristics 3-STATE
Current - Output High, Low 75mA 75mA
Output Polarity TRUE
Voltage Supply Source Single Supply
Independent Circuits 1
RoHS Status Non-RoHS Compliant

CD74ACT257M96 Overview


As a means of saving space, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Several applications are possible for 74ACT series multiplexers.As parts of its basic configuration, 16 terminations are desgined.The multiplexer is supplied with 5V voltage.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The logic switch is a member of the ACT family.Keeping the minimum supply voltage (Vsup) at 4.5V prevents some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.For the turn signal switch's operation, there are 1 outputs.It is provided with 2 inputs.

CD74ACT257M96 Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package

CD74ACT257M96 Applications


There are a lot of Rochester Electronics, LLC CD74ACT257M96 Signal Switches / Multiplexers / Decoders applications.

  • Microprocessor instruction decoding
  • Logic gates for other digital devices
  • Recording transmission
  • Signal router
  • Combinational circuit
  • HDMI applications
  • Analog, digital or video signal switching
  • Textile mills
  • Frequency multiplexing system
  • Small scale TV wall

Write a review

Note: HTML is not translated!
    Bad           Good