CD74ACT273EG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 85MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 13.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
CD74ACT273EG4 Overview
In the form of 20-DIP (0.300, 7.62mm), it has been packaged. The package Tubecontains it. T flip flop is configured with an output of Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. Currently, the operating temperature is -55°C~125°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. In order for it to function properly, its output frequency should not exceed 85MHz. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current. The object belongs to the 74ACT273 family. Its input capacitance is 10pF farads.
CD74ACT273EG4 Features
Tube package
74ACT series
CD74ACT273EG4 Applications
There are a lot of Texas Instruments CD74ACT273EG4 Flip Flops applications.
- Computing
- Dynamic threshold performance
- 2 – Bit synchronous counter
- Matched Rise and Fall
- Single Down Count-Control Line
- Instrumentation
- Divide a clock signal by 2 or 4
- Safety Clamp
- CMOS Process
- Load Control
