CD74ACT273MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 85MHz |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Current - Output | 24mA |
| Propagation Delay | 13.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.4 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74ACT273MG4 Overview
The flip flop is packaged in a case of SOIC. D latch consists of 1 elements. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as ACT. Electronic part Surface Mountis mounted in the way. The 20pins are designed into the board. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. A reliable performance of this D flip flop makes it well suited for use in TUBE. It operates from 5V power supplies. In order to ensure high efficiency, the supply voltage should remain at 5V. 8μAquiescent current consumed. The high level output current is set to -24mA. It is set to 24mAfor low level output current. Operating temperatures should be lower than 125°C. If the operating temperature is higher than -55°C, the system should operate properly. Initially, it requires a voltage of 4.5V as the minimum supply voltage. 5.5Vis the maximum supply voltage supported by it. It is possible to achieve a frequency of 85MHz. D FLIP-FLOPis the logic IC it uses. As a result, it is equipped with 1 functions . With 20 pins, it is equipped with a low power consumption. As a result of the output current of 24mA, the design flexibility is maximized.
CD74ACT273MG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
CD74ACT273MG4 Applications
There are a lot of Texas Instruments CD74ACT273MG4 Flip Flops applications.
- CMOS Process
- Single Down Count-Control Line
- Power down protection
- ATE
- Functionally equivalent to the MC10/100EL29
- Control circuits
- Buffered Clock
- Parallel data storage
- Patented noise
- Single Up Count-Control Line
