CD74ACT273SM96G4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 85MHz |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Current - Output | 24mA |
| Propagation Delay | 13.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.4 ns |
| Family | ACT |
| Logic Function | D-Type |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.95mm |
| Length | 7.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74ACT273SM96G4 Overview
As a result, it is packaged as SSOP. A total of 1elements are contained within it. 20terminations have occurred. A voltage of 5V is used as the power supply for this D latch. ACTis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. The supply voltage should be maintained at 5V for high efficiency. It consumes 8μA of quiescent current without being affected by external factors. -24mAis set as the high level output current. There is no low level output current set at 24mA. A temperature below 125°Cis recommended for operation. Temperatures above -55°Cshould be used. Despite its minimal supply voltage of 4.5V, it is capable of operating. It supports a maximum supply voltage of 5.5V volts. This frequency can be achieved 85MHz. It uses a logic IC with a D FLIP-FLOP value. It is equipped with 1 Functions . With 20 pins, it is equipped with a low power consumption. 24mA provides maximum design flexibility due to its output current.
CD74ACT273SM96G4 Features
20 pins
5V power supplies
1 Functions
20 pin count
CD74ACT273SM96G4 Applications
There are a lot of Texas Instruments CD74ACT273SM96G4 Flip Flops applications.
- Clock pulse
- Data transfer
- Modulo – n – counter
- EMI reduction circuitry
- Computing
- ATE
- Frequency Divider circuits
- Instrumentation
- Latch-up performance
- Load Control
