CD74ACT373E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | ACT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Independent Circuits | 1 |
| Delay Time - Propagation | 3ns |
| Height Seated (Max) | 5.08mm |
| Length | 25.4mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
CD74ACT373E Overview
There is an embedded version of it in package 20-DIP (0.300, 7.62mm). Tube is the way in which it is packaged. It uses Tri-State as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. Based on the way of Through Hole, this electronic part is mounted. The voltage supply is 4.5V~5.5V. The temperature at which the machine is operating is -55°C~125°C. The 74ACT series contains FPGAs of this type. An electronic part with 8 bits is designed. A device with this design has 20 terminations. In order to function, the supply voltage should be set to 5V. 20 pins are provided. It is a member of the ACT family of electronic devices. As far as ports are concerned, this device has 2 ports. It reaches a maximum supply voltage (Vsup) of 5.5V. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly.
CD74ACT373E Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
20 pin count
CD74ACT373E Applications
There are a lot of Rochester Electronics, LLC CD74ACT373E Latches applications.
- Pattern generators
- Decade counting 7-segment decimal display
- Serial Input
- Serial Output Register
- Synchronous frequency dividers
- Relay
- Display driver
- Counter control
- Instrumentation
- Automatic test equipment
