Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Weight |
1.1991g |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
74ACT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
74ACT373 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
13.5 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
3 ns |
Family |
ACT |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
INDEPENDENT CONTROL |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
5.08mm |
Length |
24.33mm |
Width |
6.35mm |
Thickness |
4.57mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74ACT373E Overview
In the 20-DIP (0.300, 7.62mm) package, it is embedded. Packaged in the way of Tube. In its configuration, Tri-State is used as the output. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Through Hole method. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -55°C~125°C. An FPGA in this series belongs to the 74ACT family. There are 8 bits in this electronic part. A device such as this has 20 terminations designed. The family in which it belongs to is 74ACT373. With a supply voltage of 5V, it operates. There are 20 pins attached to it. It is a member of the ACT family of electronic devices. 20 pins are used in its design. The electronic part is mounted in a way that corresponds to Through Hole. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. There are 5V power supplies required for this machine to operate. An electronic circuit can be found on 8 input lines. Due to its 24mA output current, it offers maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. 3 output lines generate the binary equivalent of the input lines. Aquiescent current is consumed by 8μA without being affected by external forces. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
CD74ACT373E Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
CD74ACT373E Applications
There are a lot of Texas Instruments CD74ACT373E Latches applications.
- Multi-line decoders
- Parallel-to-Serial Data Conversion
- Shift left with parallel loading
- Counters
- Phase comparator
- Multistage ripple counting
- Shift right register
- Four-bit storage with output enable
- Counter timers
- Parallel Input