CD74ACT373M96
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 13.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
CD74ACT373M96 Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. Tape & Reel (TR) is the packaging method. It uses Tri-State as its output configuration. This electrical device has Logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. During operation, the temperature is set at -55°C~125°C. 74ACT is the series number of this FPGA. An electronic part with 8 bits is designed. A device with this design has 20 terminations. It belongs to 74ACT373 family. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of ACT. It is designed with 20 pins. Surface Mount is the method used for mounting this electronic part. This device has a total of 2 ports. Subcategory FF/Latches contains this part. There is 5V power supply for it. It consists of 8 input lines from which an electronic circuit can be built. Based on its reliable performance, this device is appropriate for TR. With 24mA, maximum design flexibility is ensured. Optimal efficiency requires 5V as the supply voltage. The quiescent current consumed by it is 8μA because it is unaffected by external factors. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.
CD74ACT373M96 Features
20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
CD74ACT373M96 Applications
There are a lot of Texas Instruments CD74ACT373M96 Latches applications.
- Relay replacement
- Counter control
- Phase comparator
- Parallel Output
- A/D converters
- Relay
- Buffer Storage
- Timers
- Decade counting
- Data acquisition
