banner_page

CD74ACT373M96E4

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74ACT373M96E4
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 914
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Series 74ACT
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74ACT373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 13.5 ns
Quiescent Current 8μA
Turn On Delay Time 3 ns
Family ACT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW/HIGH
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Translation N/A
Height Seated (Max) 2.65mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74ACT373M96E4 Overview


It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. A Tape & Reel (TR) package is used to package it. It is configured with an output of Tri-State. This electrical device has a logic type of D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The voltage supply is 4.5V~5.5V. During operation, the temperature is set at -55°C~125°C. The 74ACT series contains FPGAs of this type. An electronic part with 8 bits is designed. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74ACT373 is the family name of it. A 5V voltage supply is required for operation. The device is equipped with 20 pins. There is a device in this electronic family called ACT. There are 20 pins on it. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. 5V power supplies are needed to operate it. Electronic circuits comprise 8 input lines. Based on its reliable performance, this device is well suited to TR. Due to its 24mA output current, it offers maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. The quiescent current consumed by it is 8μA because it is unaffected by external factors.

CD74ACT373M96E4 Features


20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies

CD74ACT373M96E4 Applications


There are a lot of Texas Instruments CD74ACT373M96E4 Latches applications.

  • Shift Registers
  • High-speed logic
  • Buffer Storage
  • Pattern generators
  • TV Set-top Boxes
  • Storage
  • A/D and D/A conversion
  • Automotive Cluster
  • Counter timers
  • Address register

Write a review

Note: HTML is not translated!
    Bad           Good