CD74ACT374ME4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 110MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Propagation Delay | 11.2 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2.8 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74ACT374ME4 Overview
The item is packaged in SOICcases. In total, it contains 1 elements. Terminations are 20. A voltage of 5V is used to power it. This D flip flop belongs to the family of ACT. There is an electronic component mounted in the way of Surface Mount. It is designed with 20 pins. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. In order for the device to operate, it requires 5V power supplies. A D flip flop with 2embedded ports is available. Optimal efficiency requires a supply voltage of 5V. It has 3 output lines to operate. It consumes 8μA of quiescent current without being affected by external factors. There is -24mA output current at the high level. The low level output current is set to 24mA. It is recommended that the operating temperature be lower than 125°C. In order for the system to operate properly, the temperature should be higher than -55°C. Normally, it operates with a voltage of 4.5VV as its minimum supply voltage. A maximum voltage of 5.5V can be provided by it. 110MHzis the maximum frequency that can be achieved. BUS DRIVERis the logic IC it uses. There are 1 functions available on this T flip flop. 20pins are available on this JK flip flop. With an output current of 24mA, this flip flop offers maximum design flexibility.
CD74ACT374ME4 Features
20 pins
5V power supplies
1 Functions
20 pin count
CD74ACT374ME4 Applications
There are a lot of Texas Instruments CD74ACT374ME4 Flip Flops applications.
- Asynchronous counter
- Buffer registers
- Control circuits
- Digital electronics systems
- Guaranteed simultaneous switching noise level
- Test & Measurement
- Shift registers
- Frequency Divider circuits
- ESD performance
- Bounce elimination switch
