CD74ACT540E
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13.4 ns |
| Family | ACT |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Buffer, Inverting |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Count Direction | UNIDIRECTIONAL |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT540 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
CD74ACT540E Overview
Logical driver uses a neat 20-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -55°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74ACT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic part belongs to the ACT family of parts. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74ACT540" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceiver. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 8 channels for high quality communication. It is sufficient to make 8 outputs.
CD74ACT540E Features
Bus Driver/Transceiver
WITH DUAL OUTPUT ENABLE
CD74ACT540E Applications
There are a lot of Texas Instruments CD74ACT540E Buffers & Transceivers applications.
- Fiber distributed data interface (FDDI)
- Laser diode bonding
- transmission relay
- Desktop radio
- Remote controls
- Structural bonding
- IPTV front end
- interconnection between switches
- AV receiver
- Indoor ad hoc meeting
