CD74ACT573E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 13.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.1 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Gates | 8 |
| Control Type | ENABLE HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT573E Overview
In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. Packaged in the way of Tube. There is a Tri-State output configured. This electrical device has the logic type D-Type Transparent Latch. Through Hole is used to mount this electronic part. The supply voltage of the device is 4.5V~5.5V. It operates at -55°C~125°C degrees Celsius. The 74ACT series is associated with this FPGA. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. The family in which it belongs to is 74ACT573. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. ACT is the family of this electronic device. In addition, it is designed with a pin number of 20. It is mounted according to the Through Hole method. This device has 2 ports on board, which are all available at the same time. This part can be found within the Bus Driver/Transceiver subcategory. It operates from 5V power supplies. It features maximum flexibility in design due to 24mA output current. A high level of efficiency is achieved by maintaining the supply voltage at 5V. 3 output lines generate the binary equivalent of the input lines. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.
CD74ACT573E Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
CD74ACT573E Applications
There are a lot of Texas Instruments CD74ACT573E Latches applications.
- Decade counting
- Lamp and Display (LED)
- Four-bit storage with output enable
- Serial Output Data Queuing
- Automatic test equipment
- Digital bus buffer
- Parallel data storage
- Bus system register with enable parallel lines at bus side
- Data acquisition
- Decade counting 7-segment decimal display
