CD74ACT573M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 13.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.1 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Gates | 8 |
| Control Type | ENABLE HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT573M Overview
Package 20-SOIC (0.295, 7.50mm Width) includes it. As a result, it has a packaging of Tube. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. The electronic component is mounted according to the Surface Mount method. The voltage supply is 4.5V~5.5V. A temperature of -55°C~125°C is set as the operating temperature. The 74ACT series contains FPGAs of this type. Electronic parts with 8 bits are designed for this application. This device has 20 terminations. 74ACT573 is the family name of it. The device works with a voltage of 5V for its supply voltage. There are 20 pins attached to it. It is a member of the ACT family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. With an output current of 24mA, it is highly flexible in terms of design. If you want to achieve high efficiency, make sure the supply voltage is at 5V. A binary equivalent of the input line is generated by the 3 output lines. As far as external factors are concerned, it consumes 8μA of quiescent current without getting affected by them. The maximal power current (ICC) supplied for its operation reaches 0.04mA.
CD74ACT573M Features
20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
CD74ACT573M Applications
There are a lot of Texas Instruments CD74ACT573M Latches applications.
- Automatic test equipment
- Shift left register
- Shift right with parallel loading
- A/D and D/A conversion
- Automotive Infotainment
- TV Set-top Boxes
- Counter timers
- Timers
- Counters
- Address register
