banner_page

CD74ACT573M96

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74ACT573M96
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 464
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -55°C~125°C
Packaging Cut Tape (CT)
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74ACT573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Max Supply Current 8μA
Number of Bits 8
Propagation Delay 13.5 ns
Quiescent Current 8μA
Turn On Delay Time 3.1 ns
Family ACT
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE HIGH
Power Supply Current-Max (ICC) 0.04mA
Independent Circuits 1
Number of Output Lines 3
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74ACT573M96 Overview


The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). A package of Cut Tape (CT) has been used. There is a Tri-State output configured. This electrical device has a logic type of D-Type Transparent Latch. Surface Mount is used to mount this electronic part. A 4.5V~5.5V voltage supply is required for operation. A temperature of -55°C~125°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. The family in which it belongs to is 74ACT573. The device works with a voltage of 5V for its supply voltage. There are 20 pins on it. ACT is the family name of this electronic device. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted in a way that corresponds to Surface Mount. 2 ports are available on this device. This part is included in FF/Latches. It operates from 5V power supplies. As a result of its reliable performance, it is well suited for TR. As the output current is 24mA, the design flexibility is maximum. A high efficiency supply voltage should be maintained at 5V. There are 3 output lines that correspond to the binary equivalents of the input line. As far as external factors are concerned, it consumes 8μA of quiescent current without getting affected by them. To achieve its exceptional flexibility, it relies on 8 circuits. Its maximum current supply (ICC) reaches 0.04mA.

CD74ACT573M96 Features


20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies

CD74ACT573M96 Applications


There are a lot of Texas Instruments CD74ACT573M96 Latches applications.

  • High-speed logic
  • Shift register
  • Decade counting
  • Counter timers
  • Counter
  • Up/down difference counting
  • OC-48 communication systems
  • Synchronous frequency dividers
  • Parallel Input
  • Display driver

Write a review

Note: HTML is not translated!
    Bad           Good