CD74ACT574M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Output Current | 24mA |
| Clock Frequency | 110MHz |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | Non-RoHS Compliant |
CD74ACT574M Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -55°C~125°C TAis used in the operation. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74ACT series. A frequency of 110MHzshould be the maximum output frequency. A total of 1elements are present in it. There is 8μA quiescent consumption. A total of 20terminations have been recorded. A voltage of 5V is used to power it. The input capacitance of this JK flip flopis 10pF farads. An electronic device belonging to the family ACTcan be found here. 20pins are included in its design. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be above 4.5V. The flip flop contains 2ports. The 24mA output current allows it to be designed with the greatest amount of flexibility. As an additional reference, you may refer to electronic flip flop BROADSIDE VERSION OF 374.
CD74ACT574M Features
Tube package
74ACT series
20 pins
CD74ACT574M Applications
There are a lot of Rochester Electronics, LLC CD74ACT574M Flip Flops applications.
- Dynamic threshold performance
- Bounce elimination switch
- Balanced 24 mA output drivers
- Data Synchronizers
- Differential Individual
- Frequency Divider circuits
- Guaranteed simultaneous switching noise level
- Safety Clamp
- QML qualified product
- Divide a clock signal by 2 or 4
