CD74ACT652M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| Subcategory | Bus Driver/Transceiver |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT652 |
| Pin Count | 24 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 15.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15.5 ns |
| Family | ACT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Transceiver, Non-Inverting |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Schmitt Trigger | No |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT652M Overview
Logical driver uses a neat 24-SOIC (0.295, 7.50mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -55°C~125°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74ACT series devices. 24 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic part belongs to the ACT family of parts. 24 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 24 pins. Enhanced with 2 ports. You can search "74ACT652" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceiver. The digital buffer starts up under INDEPENDENT CONTROL control technology. In quiescent state, the electronic part uses 8μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION to better serve the need. 8 channels for high quality communication. Logical driver adapts POSITIVE EDGE trigger.
CD74ACT652M Features
Bus Driver/Transceiver
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
Trigger Type: POSITIVE EDGE
CD74ACT652M Applications
There are a lot of Texas Instruments CD74ACT652M Buffers & Transceivers applications.
- Vehicle, ship, aircraft navigation and positioning
- Point-to-point networking
- Military satellite communications
- Low power, low voltage systems
- Metro access rings
- Satellite communication
- Clock radio
- Home theater wiring-free
- Wireless network systems
- Fiber distributed data interface (FDDI)
